Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Roseville, CA
Gate installation in Roseville runs into two realities that a general contractor won’t flag but a gate specialist sees every week: expansive clay soil that heaves posts seasonally, and an HOA-heavy permit culture in the newer subdivisions. We install automatic, electric, driveway, and sliding gates across 95661, 95678, and 95747, sized and set for soil that swells in winter and shrinks dry in summer. Gate Repair Citrus Heights is a dedicated gate shop, not a handyman service, and we’ve served Roseville since 2018. Call (877) 752-5078 for a free measure and a written price before any work starts.
Why Roseville Homes Are Different
Roseville is really two housing markets, and each one fails in its own way. In the older 95661 and 95678 neighborhoods, Roseville Heights, Old Roseville, and the Cirby-area subdivisions, original galvanized and wrought-iron gates sit on posts set in clay that has been moving for thirty to sixty years. Those posts lean, gates drag on driveways, and latch strikes don’t line up anymore. In 95747, WestPark and Fiddyment Farm gates are newer, but a lot of them are builder-grade cedar and vinyl hitting their first sag and hardware failure around year eight or ten. The climate works against both: 100°F-plus July days dry out and warp wood, bake powder-coat off metal, and winter rain swells the adobe-clay soil enough to heave a post a half inch. The annual ritual here is re-shimming and re-setting posts, gates that hung clean in October scrape by January. Installation work in Roseville also has to account for HOA architectural rules in the master-planned communities and old fence-line setback questions in the historic core, so we measure, quote, and often pull the permit before a single post hole goes in.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Roseville Services
Most Roseville calls start with one of two problems: a gate that won’t move right, or an electric operator that stopped responding. Here’s what each involves locally.
Gate Repair in Roseville
This covers manual and electric gates alike: bent hinges, dragging leaves, rotten wood posts, failed latch hardware, sagging frames, and stripped welds. In Roseville the soil movement means we check post plumb before we touch hardware, because fixing a hinge on a heaving post just buys you six months. We stock hinge sets, latch strikes, wheel assemblies, and post brackets sized for the older iron gates in 95661 and the cedar privacy gates across 95747, so most repairs go out in one trip. Full details on that work are on our Gate Repair in Roseville page.
Electric Gate Repair in Roseville
When an automated gate stops opening, usually the problem is a control board, a limit switch, a photo eye, a battery backup, or a buried loop detector. Roseville’s summer heat is hard on boards mounted in direct sun, and the winter clay shift throws limit switches out of calibration. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems, carrying boards, remotes, and safety edges for most of those brands in the truck. See the full scope on our Electric Gate Repair in Roseville page.
Gate Installation in Roseville
Gate installation in Roseville means building for clay soil that moves, not just bolting hardware to a post. Whether you’re in an older 95661 home with a failing wrought-iron driveway gate or a 95747 HOA community replacing builder-grade vinyl, the post depth, concrete footing, and gate weight have to be right the first time or you’ll be re-leveling it every January. We offer full Gate Installation, from a simple side-yard pedestrian gate to an automated sliding driveway system, and the price is quoted and agreed before any work starts.
Automatic Gate Installation
Signs you need it
You’re opening and closing a heavy driveway gate by hand every day, or your current operator is dead and replacement parts cost more than a new system.
What it costs in Roseville
Automatic gate installation in Roseville typically lands between $3,800 and $5,200 for a complete operator, gate, and post package on a standard single driveway.
How we do it
We measure the opening and gate weight, set the posts in concrete below the clay movement zone, hang the gate, then mount and program the operator with remotes and safety edges, testing full open and close cycles before we leave.
Driveway Gate Installation
Signs you need it
Your current driveway gate is sagging past repair, or you want a real security barrier and curb appeal instead of a chain-link or no gate at all.
What it costs in Roseville
A new manual driveway gate install in Roseville usually runs $2,400 to $3,600 depending on gate width and whether we’re setting new posts or reusing sound ones.
How we do it
We pull the old gate and hardware, set or re-set posts with concrete that bears below the expansive soil layer, hang the new gate to a level reveal, and adjust the hinges and latch so it swings clean through the full arc.
Electric Gate Installation
Signs you need it
You have a manual gate you’d like automated, or you’re building new and want the operator, keypad, and remote system all done by one crew.
What it costs in Roseville
Electric gate installation in Roseville typically ranges from $3,800 to $5,200 when we’re adding the operator, wiring, keypad, and safety edges to a gate we install in the same job.
How we do it
We handle the power run from your panel, set the operator on a concrete pad, wire the keypad and photo eyes, and program remotes, then test obstruction reversal and limit settings before handing it over.
Sliding Gate Installation
Signs you need it
Your driveway slopes or your setback is too tight for a swing gate, so a rolling or cantilever slide gate is the only option that will actually work on the site.
What it costs in Roseville
Sliding gate installation in Roseville generally runs $4,400 to $5,800 for a single-leaf rolling gate with track, operator, and safety devices.
How we do it
We lay the track or set the cantilever supports, set the operator and chain, hang and balance the gate leaf, then wire and test the safety loop, photo eyes, and remote controls.
What Gate Installation Costs in Roseville
| Item | Typical range in Roseville |
|---|---|
| Manual driveway gate install | $2,400 – $3,600 |
| Automatic gate install (gate + operator) | $3,800 – $5,200 |
| Sliding gate install | $4,400 – $5,800 |
Prices shift with gate weight, post conditions, and whether the job needs a new power run or HOA submittal. You get a fixed written quote before we dig.
How long does gate installation take in Roseville?
Most single driveway gate installations in Roseville take one to two days on site, depending on concrete cure time for posts and whether we’re running new electrical. We schedule the measure, then the build, and we don’t start until the gate and hardware are on hand.
Do you handle the HOA approval for a new gate in Roseville?
We provide the drawings, material specs, and color samples your HOA architectural committee asks for, and we’ve worked through submittals in WestPark, Fiddyment Farm, and Highland Reserve. The application itself gets filed by the homeowner, and we build to the approved spec.
Brands We Service in Roseville
We stock parts and replacements for Ghost Controls and Mighty Mule residential systems, plus DoorKing and Elite commercial-grade operators common on Roseville HOA entry points and apartment properties. Most parts are in the truck or available same-week, so we don’t leave a gate down waiting on a board. See our brands for the full list of nine manufacturers we service.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Roseville, CA
| Service | Typical range in Roseville |
|---|---|
| Manual driveway gate install | $2,400 – $3,600 |
| Automatic gate install (gate + operator) | $3,800 – $5,200 |
| Electric gate install | $3,800 – $5,200 |
| Sliding gate install | $4,400 – $5,800 |
| Gate repair diagnostic | $99 – $125 |
| Gate hinge and hardware repair | $180 – $340 |
| Electric gate repair | $225 – $475 |
| Gate opener motor replacement | $550 – $850 |
In Roseville the usual price-drivers are rotted or leaning posts that need full replacement, long power runs from the house panel to the operator, and HOA-required materials on street-facing gates. Every quote is fixed in writing and agreed before we start, so the invoice doesn’t surprise you after the fact.
Neighborhoods We Serve in Roseville
We run calls all over Roseville weekly, and we know which areas fight clay heave and which are dealing with aging hardware.
- Old Roseville and Roseville Heights (95661)
- Cirby-area subdivisions (95678)
- WestPark (95747)
- Fiddyment Farm (95747)
- Highland Reserve (95747)
We can typically reach most Roseville addresses same day for a repair diagnostic, and installation measures are scheduled within a few days.
Service Area – Cities Near Roseville
Our gate work regularly takes us across the Placer and Sacramento County line. We serve Rocklin, CA to the northwest, Citrus Heights, CA to the southwest, Antelope, CA just west of Roseville, and Foothill Farms, CA further west across the county line.
Serving Roseville, CA – Our Local Coverage Area
We’re based in the Roseville area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Roseville
For a gate that won’t close or won’t open, we can typically reach most Roseville addresses same day, including 95661, 95678, and 95747. Call (877) 752-5078 and we’ll give you a real arrival window, not a vague “sometime today.”
A straight gate replacement on existing posts usually doesn’t require a city permit, but new posts, an automated operator with new electrical, or a gate on a street-facing frontage in an HOA community often does. We’ll tell you at the measure whether your job needs a permit or architectural review, and we handle the drawings.
Yes, we build to HOA-approved material, finish, and height specs in communities like WestPark and Fiddyment Farm, and we provide the submittal drawings and product data your architectural committee needs. We’ve done enough of these to know what gets approved the first time.
If your gate is sagging, scraping, or dead, call (877) 752-5078 for a free estimate. Gate Repair Citrus Heights has served Roseville since 2018, and we specialize exclusively in gates, it’s all we do.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically the same day.
- 4You approve before work beginsNothing starts until you say go.
What Roseville Customers Say
"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
- Rafael Mendoza"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
- Eduardo Salazar"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
- Cole Padgett