Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Antelope
Electric gate repair in Antelope runs $180 – $520 for most jobs, and we can usually have a technician on-site the same day you call. That range covers everything from a misaligned safety sensor to a full opener motor replacement on a slide gate. If your gate won’t open, won’t close, or keeps reversing on its own, call us at (877) 752-5078 and we’ll walk through the symptoms before we even dispatch.
Antelope’s housing stock is a specific kind of challenge. Most of these 1980s and 1990s tract homes were built with narrow side yards and tight RV pad access, which means a lot of electric gates here are slide gates squeezed into spaces where a swing gate never could have worked. Add in clay-heavy soil that swells every winter and bakes hard every summer, and you get post footings that shift by fractions of an inch. On a slide gate, a quarter inch of movement is enough to throw the rack and pinion out of alignment and jam the operator. That’s the work we do constantly in the 95621 and 95843 zip codes, and it’s why our Electric Gate Repair team carries rack stock, shims, and post anchors on every truck that rolls into Antelope.
We specialize exclusively in gates. It’s all we do, so the technician who arrives at your Antelope home isn’t a general handyman guessing at your brand. Whatever operator is on the gate, we know it.
Why Gate Repair Citrus Heights Is Antelope’s Preferred Electric Gate Repair Company
Antelope sits right at the edge of our home service area, and we’re in and out of these neighborhoods constantly. The Antelope Crossings subdivision, the older streets around Antelope Road and Walerga Road, and the grid of 95843 tract homes near Tetotom Park all have the same story: builder-grade gates that were installed when the house was built and are now failing together as a cohort. We see the pattern before we even back the truck up to the gate.
Our technicians are certified across nine gate and operator brands, including LiftMaster, FAAC, BFT, DoorKing, Viking, Elite, Ghost Controls, and Mighty Mule. That matters here because Antelope’s original construction leaned heavily on a few specific builder suppliers, and the brand on your gate is often whatever the tract developer specified in 1989 or 1994. We know those systems, we know how they fail after 30 years of Sacramento Valley heat, and we stock or can get the parts fast.
Response time to Antelope is typically same-day for afternoon calls and next-day for late evening calls. Property managers with multiple rentals in the 95843 tract grid call us because we’ll be on-site within 24 hours for a hard failure, and because every job starts with a written, agreed price before any work begins. Troy Minden, who runs Gate Repair Citrus Heights, built the company around that principle: diagnose first, quote second, work third. No invoice surprises at the end.
One call covers repair or full installation. If the gate is too far gone to rebuild, we’ll tell you straight and give you a written installation price on the spot, using the same brands we already service.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Gate Opener Repair in Antelope
Gate opener repair in Antelope is the service we’re called for most often, and it usually runs $220 – $450 depending on whether we’re replacing the arm, the motor, or the control board. A failed opener is exactly what it sounds like: the gate itself is structurally fine, but the electric motor that drives it has quit, is grinding, or is running but not moving the gate. In Antelope’s older tract neighborhoods, that strain usually traces back to something the opener is fighting against, not the opener itself.
What a Tight Side Yard Does to an Opener
Antelope’s side-yard gates frequently open onto narrow concrete RV pads built for boat trailers and small campers. Half the time, the gate wasn’t originally electric at all; someone added an opener later, often without accounting for swing clearance or post stability. When the opener has to muscle a gate through a path that’s a half inch too tight, it burns out motors faster than the rated duty cycle would ever suggest.
Post Shift and Operator Strain
Most Antelope homes sit on expansive clay. After a rainy winter, the clay swells and heaves fence post footings upward; after the dry summer, it shrinks back and leaves the post loose. An opener mounted on a post that’s moving through the seasons is going to strip gears, bend arms, and eventually fail, regardless of how expensive the motor was. We always check the post before we quote the motor, because replacing a $400 opener on a loose post only buys you a few seasons.
Automatic Gate Repair in Antelope
Automatic gate repair in Antelope covers the full system, not just the motor: the keypad, the remote receivers, the loop detectors, the safety sensors, and the control board all have to work together or the gate misbehaves. Most of these calls run $180 – $420. A gate that opens but won’t close, or closes halfway and reverses, usually points to a failing safety photocell or a loop detector that isn’t detecting the vehicle anymore, not a bad motor.
Shared Driveways and Access During Repair
Antelope has a lot of shared driveway situations, especially on corner lots and the older cul-de-sac streets where two gates serve one access point. We plan repairs so the neighbor’s access stays functional. That means chaining off the gate during the work, running the operator in manual mode, or doing the motor swap in stages if it’s a dual-gate setup. We never leave a shared access point blocked overnight. It’s a basic courtesy that a lot of gate companies forget, and it’s one of the reasons property managers in the 95621 corridor keep our number.
When the Gate Needs Rebuilding, Not Just Repair
Sometimes the operator is fine and the gate itself is the problem. Original builder-grade wood gates in Antelope are now 25 to 35 years old, and many have rotted hinge posts or frames that have racked so badly the motor can’t overcome the binding. In those cases we’ll level with you: a rebuilt frame with a new post footing costs more than a motor, but it’s the only repair that lasts. We quote it upfront so you can decide.
Trusted Brands We Service in Antelope
We service LiftMaster service in Antelope, FAAC, Elite, and Mighty Mule on Antelope properties, along with five other major gate and operator brands. LiftMaster shows up constantly on the newer slide gates that replace failed originals, while Mighty Mule and Ghost Controls are common on the older DIY retrofit installs that predate our involvement. FAAC and Elite are the heavy commercial-grade systems we see at HOA entries and multi-unit properties along Antelope Road. Because Antelope is in our regular service loop, we keep common control boards, remotes, and safety sensors staged for same-day pickup, so you’re not waiting on a ground shipment from a regional warehouse while your gate sits stuck open.
See the difference
Before
After
Before
After
Before
AfterCommon Electric Gate Repair Problems We See in Antelope Homes
- Slide gate rack and pinion binds after winter rains. The clay swells, the post footing heaves, and the rack shifts out of alignment by a quarter inch. The opener strains, the motor overheats, and the gate stops mid-travel or refuses to close all the way.
- Original builder-grade swing gates sag at the hinge post. Antelope’s 1980s-90s wood gates were never meant to carry an electric opener. The added weight pulls the hinge side down, the panel drags on the concrete, and the motor eventually burns itself out trying to drag the extra load.
- Safety photocells fail on loose posts. When the post the photo-eye is mounted on shifts seasonally, the beam loses alignment. The gate reverses randomly or refuses to close, even when the path is clear. Most people assume it’s the opener. It’s usually the beam.
- Keypads and remotes lose sync with the operator. Power surges in Antelope’s hot summer afternoons can knock a control board out of programming. We get a lot of calls in July and August from homeowners whose remotes just stopped working overnight.
Pricing for Electric Gate Repair in Antelope, CA
Here’s what we typically see in Antelope for electric gate work:
- Gate opener repair: $220 – $450
- Safety sensor or photocell replacement: $180 – $280
- Keypad or remote replacement and reprogramming: $120 – $250
- Control board replacement: $300 – $520
- Slide gate rack reset and post re-level: $350 – $600
- Full automatic gate installation (operator, gate panel, safety devices): $2,800 – $6,500
What moves the price is whether we’re repairing an existing component or fixing the failure underneath it. A bent gate frame or a heaved post costs more than a swapped motor, but both are worth doing right because they’re what actually caused the motor to fail. Every Antelope job includes a free diagnostic estimate, and the price is quoted and agreed before any work starts. No add-ons at the end.
Call (877) 752-5078 for a free estimate. We’ll come out, diagnose it, and hand you a written number before turning a single wrench.
We Also Serve Cities Near Antelope
Our route covers Antelope and the surrounding Sacramento Valley corridor. If you’re in Foothill Farms, Citrus Heights, North Highlands, or Roseville, you’re in our regular service area, and the same team covers the whole loop. For a full look at what we do and where we go, start with our main Electric Gate Repair page. One number covers all of it.
Serving Antelope, CA – Our Local Coverage Area
We’re based in the Antelope area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Antelope
The clay under your post footings swelled during the wet season and lifted the post, which threw your rack and pinion out of alignment, so the operator is now fighting the gate. The motor may still be fine; the gate is the problem. We diagnose it on-site and tell you whether you need a rack reset and re-level or a full opener replacement. Most of the time it’s the rack and footing, not the motor. Call (877) 752-5078 for an exact diagnosis.
Because the original builder-grade gates were all installed at roughly the same time, out of the same materials, on the same clay soil, and they’re all hitting the 25-35 year mark right now. It’s not a coincidence; it’s a cohort aging out. We see the same block-by-block pattern all through the 95843 tract grid. The good news is that once the post footing and hardware are brought up to current standard, the gate tends to hold up for decades, not years.
Yes. We plan every Antelope repair around access, especially on shared driveways where two properties use one gate. We can run the gate manually, chain it off safely, or stage the work so the access point is never fully blocked. If we need to leave a gate disabled overnight for safety, we’ll coordinate with both parties and leave the access workable.
In Sacramento County, an automatic gate must have safety photocells that detect obstructions and reverse the gate, plus an automatic reverse mechanism on the operator itself if it doesn’t already have pressure-sensitive stops. On slide gates specifically, the county requires guarding on the exposed rack to prevent entrapment. Any gate serviced by our Antelope crew leaves with those safety devices verified or flagged for replacement. We won’t hand over a gate that’s dangerous to operate.
Yes, we service solar-powered operators from Mighty Mule, Ghost Controls, and others on Antelope properties. Long driveways out toward the eastern edge of the 95843 boundary often lack a convenient power run, so solar is the practical choice. We check the panel, the battery, and the regulator, because in Antelope’s summer heat a weak battery will drain even with full sun. Most solar problems here are battery or charge-controller issues, not panel failures. Call (877) 752-5078 for a free estimate.
Written by Troy Minden, Owner at Gate Repair Citrus Heights, serving Antelope since day one. We specialize exclusively in gates, and we know Antelope’s gates better than anyone.