Gate Repair in Antelope - Same-Day Repair, Priced Before We Start

Fast, Reliable Gate Repair Across Antelope

Gate repair in Antelope usually costs between $145 and $400 for hinge, latch, and alignment work on a manual gate, while electric operator and loop detector repairs run $285 to $750 depending on the brand and part. Most jobs in Antelope can be scheduled within one to two business days, and we carry common LiftMaster, FAAC, and Mighty Mule parts in our trucks so many repairs are done in a single visit. If your gate is dragging on the concrete, stuck open, or refusing to close on the RV pad, call (877) 752-5078 and we’ll give you a straight answer on what it takes to fix it.

Call (877) 752-5078

Why Gate Repair Citrus Heights Is Antelope’s Preferred Gate Repair Company

We work on gates in Antelope almost every week, and the calls follow a pattern. Homes built in the 1980s and 90s off Walerga Road, North Loop Boulevard, and around Antelope Crossing came with builder-grade gates that are now hitting the end of their service life together. Residents in the 95843 and 95621 zip codes call us for the same things: hinge posts that have heaved out of the clay, wood frames that have racked from dry heat, and slide gates that bind because the original opening was tight to begin with. Knowing the housing stock here means we show up with the right parts and a realistic plan, not a learning curve.

Our gate technicians service nine gate and operator brands, including LiftMaster, FAAC, Elite, Mighty Mule, BFT, DoorKing, Viking, Linear, and Ghost Controls. That matters in Antelope because the neighborhood has a mix of original manual gates, aftermarket slide operators, and newer electric systems on the homes that have been updated. Property managers and homeowners don’t have time for a generalist to figure out their brand on the clock. Our Gate Repair team works exclusively on gates, which is why we can diagnose quickly and quote accurately before any work begins.

We’re based in Citrus Heights, which puts most Antelope addresses within a 10 to 15 minute drive for our crews. Response time to Antelope is typically same-day or next-day for urgent repairs, though we schedule exact arrival windows rather than vague four-hour blocks. Whatever the gate problem is – a failed operator, a rotted post, a sagging weld – we handle it without farming work out to a fence company or a general contractor.

Iron Gate Repair in Antelope

Iron gate repair in Antelope typically costs $180 to $450, depending on whether we’re re-welding a cracked frame, replacing hinges, or straightening a bent section. The iron gates we see in Antelope are usually driveway gates on the older tract lots, and many have been painted over so many times that the original weld points are hidden until they crack. That’s normal for a 30-year-old iron gate in this climate. Dry summer heat bakes the paint and exposes the metal to oxidation, and the clay-heavy soil works the posts loose season after season.

We perform the repair without removing the gate when possible, which keeps the work fast and keeps your driveway useable. If the damage is at the hinge side, we’ll cut out the failed section, weld in a new plate or bracket, and re-hang the gate to clear the ground by the right margin. Every price is quoted and agreed before any work starts, so there’s no surprise on the invoice.

Hinge and Post Repair

Iron gates fail at the hinge post more than anywhere else. A post that has shifted a quarter inch from clay expansion throws the entire gate out of plane, and the bottom corner starts scraping or the latch stops lining up. We reset the post in a proper concrete footing, re-align the gate, and replace rusted hinge hardware with components sized for the gate’s actual weight.

Weld and Rust Repair

Antelope’s summer heat doesn’t cause rust directly, but it does crack paint, and winter rain does the rest. We grind out rusted sections, weld in fresh steel where the frame has thinned, and treat the repaired area so it holds up to the next wet season. For gates that are rusted through in multiple places, we’ll tell you honestly whether repair is still worth the money or whether replacement is the smarter call.

Sliding Gate Repair in Antelope

Sliding gate repair in Antelope runs from $220 for a simple track clean and roller replacement up to $850 for operator, loop detector, or rack repair on an electric slide gate. Many Antelope lots were laid out with narrow side yards and short setbacks, so a swing gate that opens onto the street or the RV pad simply won’t fit. The sliding gate is the answer, but it has its own failure points here: track fouling from dirt and leaf litter, wheels that flatten from constant use, and operators that lose their limit settings when the power flickers in winter storms.

We diagnose the whole system, not just the symptom. A slide gate that jerks or stops mid-travel can be a mechanical problem, a limit-switch issue, or a failing motor. We test each component in order and only replace what’s actually failed.

Track and Roller Repair

On Antelope’s older slide gates, the track is often set directly onto a concrete slab that has settled unevenly. That creates high spots, and the gate rides up on the rollers or drags. We level the track, replace worn rollers, and set the rack-and-pinion mesh correctly so the gate travels smoothly without grinding.

Operator and Loop Detector Service

Electric slide gates in Antelope depend on loop detectors buried in the driveway to know when a car is present. Loop failures are common after heavy winter rain, when the clay soil shifts and breaks the wire. We replace failed loops, reprogram LiftMaster and FAAC operators, and set entrapment protection so the gate reverses if it meets resistance.

Trusted Brands We Service in Antelope

We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems. That covers what we actually find on Antelope gates, from the Mighty Mule unit on a backyard chicken-run gate to the LiftMaster operator on a driveway slide gate. We keep a working stock of common parts for these brands in our service vehicles, which means fewer second trips and faster repairs for Antelope customers. If you have a gate with a brand you don’t recognize, call us – chances are we know it, and if we don’t, we’ll tell you that up front instead of guessing at your expense.

Common Gate Repair Problems We See in Antelope Homes

• Hinge posts heaved out of the clay. Antelope’s soil expands when wet and contracts when dry. Posts set in shallow footings work loose, the gate drops, and the latch stops engaging. We reset the post and re-hang the gate so it clears the ground properly.
• Builder-grade wood gates cracking from the heat. Thirty summers of Sacramento Valley sun will split boards and loosen joinery. We see racked frames and sagging panels on original gates throughout the older tract streets, and often the panel can be straightened and reinforced without replacing the whole gate.
• Sliding gates binding in tight side yards. Many Antelope homes have slide gates fitted into spaces with only a few inches of clearance on either side. A tiny post shift or a flat roller means the gate scrapes or sticks. Repairs have to account for that tight original geometry.
• Electric operators failing after power interruptions. Winter brownouts and lightning strikes knock out control boards and wipe limit settings. We reprogram operators, replace failed boards, and test entrapment protection before we leave.

Pricing for Gate Repair in Antelope, CA

We Also Serve Cities Near Antelope

Beyond Antelope, we serve Antelope and the surrounding communities of Foothill Farms, Citrus Heights, North Highlands, and Roseville. If you live near the Antelope border in any of these areas, the same crews and the same pricing apply.

FAQs About Gate Repair in Antelope