Farm & ranch
Wrought iron
Wood & steel frame
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Rancho Cordova, CA
Gate installation in Rancho Cordova means working with two very different properties. The 1960s and 70s tract neighborhoods around 95670 still hold original wrought-iron and redwood gates on settled concrete footings, while the ranchette properties in 95741 and 95742 need heavy agricultural gates on long driveways. We install both, and we handle the repair side too. From a brand-new automatic gate on a half-acre property to re-plumbing a leaning iron pedestrian gate on a stucco ranch house, call us at (877) 752-5078 for a straight answer and a written quote.
Why Rancho Cordova Homes Are Different
Rancho Cordova’s gate work splits into two disciplines. The original tract housing stock, built mostly between the early 1960s and the early 1980s, is single-story stucco ranch with narrow driveway gates and pedestrian gates in wrought iron or redwood. Those gates were often set on thin concrete footings. After 50 or 60 years of soil movement, the posts have heaved, the concrete has cracked, and the gate sags or drags. Repair here usually means re-plumbing the posts and re-setting the hinges, not just tightening a few bolts.
The eastern and southern edges of Rancho Cordova are different. Larger lots, long fence lines, and custom gates on rural residential properties. These gates are wider, heavier, and frequently automated. The Central Valley climate works against both types: hot, dry summers bake redwood until it warps and crack, and metal components expand in the heat. Winter brings tule fog and rain that drive moisture into hinges and latches. Gates in Rancho Cordova stick seasonally unless the hardware is chosen for the weather and lubricated year-round. Older iron gates rust at the hinge pins and latch plates. Redwood gates split at the stile joints. None of this is surprising to us – it’s the same pattern we see on every Rancho Cordova street.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Rancho Cordova Services
Most calls from Rancho Cordova homeowners fall into two categories: a gate that won’t open or close properly, and an electric gate that has stopped responding entirely. Here’s what each one involves.
Gate Repair in Rancho Cordova
Manual gate repair in Rancho Cordova covers bent hinges, sagging gates, rotted redwood stiles, rusted latch hardware, and posts that have drifted out of plumb. On the 1960s tract homes, we see a lot of original iron gates where the mounting post has leaned forward over the years and the gate now drags on the walkway. On the ranchettes, the issue is usually weight – wide agricultural gates that twist and pull their hinge screws. We carry replacement hinges, latch parts, post anchors, and wood sections for both styles. If you know the gate is off but can’t tell exactly what failed, we’ll diagnose it on site. Full details on what we repair and how we quote are on our Gate Repair in Rancho Cordova page.
Electric Gate Repair in Rancho Cordova
Electric gates fail differently than manual ones. The operator may hum but not move the gate, the remote may stop working, the gate may open halfway and reverse, or the safety loop may stop detecting a vehicle. In Rancho Cordova we see more operator failures during fog season, when moisture works into control boards and limit switches. We service LiftMaster, FAAC, BFT, and Linear operators, among others, on both residential and light commercial setups. The diagnosis starts with the operator and control board, then the wiring run, then the gate hardware itself. For a run-through of common electric gate failures and what they cost to fix here, see Electric Gate Repair in Rancho Cordova.
Gate Installation in Rancho Cordova
New gate installation in Rancho Cordova usually means replacing a gate that has outlived its footing or no longer matches how the property is used. A 1970s wrought-iron pedestrian gate with rusted-out hinge posts, or a redwood driveway gate that warped past adjustment, gets replaced with new steel or a properly sealed wood gate on new posts. If the old gate was manual and the homeowner now wants a remote opener, that’s a full automatic gate installation with an operator, safety edges, and a keypad or intercom. Every install starts with a site measurement and a written quote. We also outline the full range of what we build on our Gate Installation page.
Automatic Gate Installation
Signs you need it
A homeowner upgrading from a manual gate, a property manager who needs controlled entry, or a new build in 95742 where the gate posts are set but no operator has been installed.
What it costs in Rancho Cordova
Automatic gate installation in Rancho Cordova typically runs from $2,800 to $7,500 for single swing gates, and $3,400 to $9,000 for sliding gate systems.
How we do it
We assess the gate weight and traffic type, set the operator mount and concrete pad, run line-voltage power to the operator, install the control board, remote receiver, and safety devices, then test the full open and close cycle.
Driveway Gate Installation
Signs you need it
The existing driveway gate sags badly, the posts are cracked or tilted, or the homeowner wants a wider opening for a second vehicle or a new RV.
What it costs in Rancho Cordova
A new driveway gate in Rancho Cordova, including posts and hardware, typically starts around $900 and can exceed $3,000 depending on width and material.
How we do it
We remove the old gate and posts, dig and pour new footings to a depth that holds the gate weight, set the posts plumb, mount the gate on adjustable hinges, and set the latch and closer hardware.
Sliding Gate Installation
Signs you need it
A short or sloped driveway with no room for a swing arc, a wide opening that a single swing gate can’t span, or a commercial entry that needs a cantilever design.
What it costs in Rancho Cordova
Sliding gate installation in Rancho Cordova typically runs from $3,400 to $9,000, with wider commercial openings on the upper end.
How we do it
We set the track or install a cantilever frame, mount the gate on rollers or a V-track system, attach the operator drive chain, and verify smooth travel across the full opening.
What Gate Installation Costs in Rancho Cordova
| Item | Typical range in Rancho Cordova |
|---|---|
| Pedestrian gate (wrought iron or steel) | $500 – $1,600 |
| Driveway gate (manual, wood or steel) | $900 – $3,000+ |
| Automatic gate operator (installed) | $2,800 – $9,000 |
| Full sliding gate system | $3,400 – $9,000 |
How long does a gate installation take in Rancho Cordova?
Most standard driveway gate installations run one to two days. Automatic opener installation on an existing gate is usually a single day. Custom or sliding gates that need new footings or track work take longer, and we’ll give you a firm schedule before we start.
Do I need a permit to replace a gate in Rancho Cordova?
In most Rancho Cordova residential cases, replacing a gate on existing posts does not need a permit. New posts, new footings, or an automatic operator with electrical work may. We check the current city requirements for your address and include any needed permit work in the quote.
Brands We Service in Rancho Cordova
We service and install LiftMaster, FAAC, BFT, and Linear gate operators in Rancho Cordova, along with other major residential and commercial brands. Common replacement parts – control boards, remote receivers, limit switches, and hinge kits – are stocked on our trucks, so many repairs finish on the first visit. See our brands for the full list we cover.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Rancho Cordova, CA
| Service | Typical range in Rancho Cordova |
|---|---|
| Gate repair (diagnostic + minor hardware adjustment) | $75 – $150 |
| Hinge replacement (single or double, steel or iron) | $100 – $300 |
| Redwood or iron pedestrian gate replacement | $500 – $1,600 |
| Driveway gate installation (manual) | $900 – $3,000+ |
| Electric gate repair (operator or control board) | $225 – $500 |
| Automatic gate operator installation | $2,800 – $7,500 |
| Sliding gate system installation | $3,400 – $9,000 |
| Warner gate lockout / misalignment correction | $150 – $350 |
What pushes a Rancho Cordova gate job toward the top of these ranges is usually the gate’s weight and the condition of the posts. A long ranchette gate on rusted posts takes more labor and material than a 3-foot pedestrian gate on a stable footing. On every repair and installation, we quote the full price before work starts – you approve the number first, and it doesn’t move on you at invoice time.
Neighborhoods We Serve in Rancho Cordova
We cover all three Rancho Cordova ZIP codes – 95670, 95741, and 95742 – including the older tract streets and the larger ranchette properties on the east and south edges. Response time for most repair calls in Rancho Cordova is same-day or next-day depending on call volume.
- Rancho Cordova proper (95670)
- Anatolia (95742)
- Sunridge (95741)
- Capital Village (95670)
- White Rock (95670)
Service Area – Cities Near Rancho Cordova
Gate Repair Citrus Heights has served Rancho Cordova since 2018, and we also cover the surrounding Sacramento County cities. If you’re in Fair Oaks, CA, Carmichael, CA, Orangevale, CA, or Del Paso Park, CA, the same gate-focused crew handles your repair or installation. One call covers all of it.
Serving Rancho Cordova, CA – Our Local Coverage Area
We’re based in the Rancho Cordova area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Rancho Cordova
For most gate repairs, yes. We schedule same-day and next-day service across all three Rancho Cordova ZIP codes. The gate slamming shut on its own or a driveway gate that won’t open at all is a priority, and we’ll tell you on the phone when our technician can be there.
Yes. Several Rancho Cordova developments have architectural guidelines for gate style, height, and material. We’ve worked inside those rules, and we’ll note any HOA constraints from the start so the install doesn’t have to be re-done after an association review.
If the gate and posts are structurally sound, we repair the hardware and keep the original. If the posts have heaved or rusted through, or the gate is warped beyond adjustment, replacement is the better spend. We’ll give you both options with prices and let you decide. Call (877) 752-5078 for a free estimate.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically the same day.
- 4You approve before work beginsNothing starts until you say go.
What Rancho Cordova Customers Say
"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
- Sofia Castillo"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
- Steve Norris"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
- Rosa Herrera