Farm & ranch
Wrought iron
Wood & steel frame
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Rancho Cordova
A typical gate repair in Rancho Cordova runs $165 to $480, depending on whether we’re re-plumbing a heaved hinge post on a 1960s wrought-iron gate or replacing an operator board on a ranch-style slide gate. Most calls in the 95670, 95741, and 95742 ZIP codes are diagnosed same day and repaired within 24 to 48 hours. We cover the full span of Rancho Cordova, from the older tract neighborhoods near Coloma Road down to the half-acre ranchettes off Jackson Highway. Call us at (877) 752-5078, and we’ll give you an honest assessment over the phone before we even schedule a truck.
Why Gate Repair Citrus Heights Is Rancho Cordova’s Preferred Gate Repair Company
Rancho Cordova residents call us because we’re a gate shop, not a handyman service that happens to glance at a gate between fence posts. Our team works exclusively on gates, every day, which means when we show up in a 95670 tract home or out near the 95742 ranchettes, we already know what we’re likely to find. The original wrought-iron pedestrian gates off La Loma Drive? We’ve repaired dozens. The heavy agricultural gates along Sunrise Boulevard? We know the brands on those operators and carry common parts on the truck.
Troy Minden built this business around one idea: whatever brand is on your gate, we know it. Our team is certified across nine major gate and operator brands, including LiftMaster and Linear, which covers most of what’s installed across Rancho Cordova’s housing stock. That brand coverage means we don’t spend an hour diagnosing a controller we’ve never opened before. We show up, identify the problem, quote a price, and get to work. From a bent hinge to a failed electric operator, we handle it.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Sliding Gate Repair in Rancho Cordova
Sliding Gate Repair in Rancho Cordova most often comes down to one of three problems: a gate panel that’s dragging on the track, a motor that runs but won’t move the gate, or a rack-and-pinion system that’s jumped tooth alignment. On the east side of town, where long driveways off Jackson Highway lead back to custom slide gates, we regularly find operators that have been fighting a sagging post or a misaligned track for months before the motor finally gives out.
Track and Roller Realignment
Rancho Cordova’s flat terrain doesn’t cause the dramatic settling you see in the foothills, but decades-old concrete slabs shift enough to throw slide gates out of level. We check the gate’s travel, reset the rollers, and adjust the track so the panel moves without binding. A track realignment on a standard residential slide gate in Rancho Cordova typically runs $180 to $320, including the adjustment and any shim work.
Rack and Pinion Correction
When a slide gate starts grinding or lurching, the rack gear has usually drifted out of alignment with the pinion. This is common on older gates where the original install used lighter hardware than the gate actually needed. We recently repaired a heavy custom slide gate on a half-acre ranchette in the 95742 ZIP, where the original LiftMaster operator had been struggling against a misaligned rack and pinion. Our tech re-plumbed the hinge post footing, corrected the sag, replaced the worn rack sections, and installed a new LiftMaster operator with safety photocells. Silent operation, first pass.
Wrought Iron Gate Repair in Rancho Cordova
Wrought Iron Gate Repair in Rancho Cordova frequently isn’t about the metal at all. In the 1960s tract neighborhoods across 95670, the original wrought-iron gates were set on thin-set concrete footings that have heaved and settled over five or six decades. The iron is fine; the post it hangs from isn’t. A dragging gate corner, a latch that won’t line up, a hinge that keeps loosening itself, those are almost always footing problems masquerading as hardware problems.
Post Re-Plumbing and Footing Repair
When a hinge post is out of plumb by more than a few degrees, adding a shim or cranking the hinges only buys weeks, and then the sag returns. We re-plumb the post, reset the base in concrete where the original footing has crumbled, and then hang the gate properly on new hardware. Re-plumbing one post with fresh concrete on a Rancho Cordova pedestrian gate typically runs $220 to $400 depending on whether we’re also cutting out and re-welding hinge mounts.
Hinge and Latch Rebuilds
Original wrought-iron gates from the 1960s and 70s often still have their factory hinges, and those barrel hinges have decades of wear. Rather than patch a rusted hinge, we cut it off, weld on a new barrel or bearing hinge sized to the gate’s weight, and rebuild the latch so it catches cleanly. If you hear your gate clanking against the latch plate every time the wind blows, that’s the fix, and it usually runs between $150 and $260 on a standard 4-foot pedestrian gate in Rancho Cordova.
Trusted Brands We Service in Rancho Cordova
Our technicians are certified on nine gate and operator brands, and around Rancho Cordova that matters because the housing stock spans so many eras. Tract homes from the 1960s might still have an original LiftMaster opener, while the newer ranchettes often run FAAC or BFT operators on heavy custom-built gates. We carry control boards, limit switches, and common hardware for those brands on the service truck, so a repair doesn’t wait on a parts shipment from a warehouse. Our service area includes the full span of Rancho Cordova, from the 95670 neighborhoods up through 95741 and 95742. One call covers repair or full installation.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Rancho Cordova Homes
- Heaved hinge posts on original 1960s iron gates in 95670. The thin-set concrete footings under those original posts shift over decades, and the gate starts dragging the latch side. A hinge adjustment alone will not fix it; the post needs to be re-plumbed and the footing rebuilt.
- Warped redwood gates after Central Valley summers. Rancho Cordova’s dry heat bakes wood until the gate slab bows, the latch misaligns, and the top hinge pulls loose. Seasonal hardware swaps and brace adjustments get it closing cleanly again.
- Rust and sticking in winter. Tule fog and rain drive moisture into hinges, latches, and chains on both ornamental iron gates and agricultural gates along the rural edges of the city. Once the corrosion starts, the gate gets harder and harder to open until a hinge seizes.
- Operators fighting the gate they’re installed on. On ranchettes and larger properties, a heavy gate paired with an under-spec operator runs the motor hot and burns boards out early. We replace the board and correct the mechanical load so it doesn’t happen again.
Pricing for Gate Repair in Rancho Cordova, CA
Here’s what we see across Rancho Cordova right now. A basic hinge adjustment or latch realignment runs $125 to $195. A post re-plumb with fresh concrete runs $220 to $400. Full rack and pinion correction on a slide gate runs $320 to $550, including parts. Operator board replacement starts at $280 and goes up depending on the brand; a full new residential slide gate operator installed runs $850 to $1,500. Every price is quoted and agreed before any work starts, so the invoice matches the number you approved. We don’t start a job without telling you exactly what it will cost.
Call (877) 752-5078 for a free estimate. We’ll ask what the gate is doing, pin down the likely problem, and give you a straight number before we send a tech out.
We Also Serve Cities Near Rancho Cordova
Our Gate Repair team covers Rancho Cordova and the surrounding communities, including Fair Oaks, Carmichael, Orangevale, and Del Paso Park. If you’re in any of those areas, same scheduling applies. For more about the Rancho Cordova service area, see Gate Repair in Rancho Cordova.
Serving Rancho Cordova, CA – Our Local Coverage Area
We’re based in the Rancho Cordova area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Rancho Cordova
No. A dragging wrought-iron gate in the older Rancho Cordova tract neighborhoods is almost always a footing problem, not a hinge problem. Those original gates were mounted on thin-set concrete footings that have heaved and settled over decades, and once the post is out of plumb, hinge adjustments only mask the sag for a few weeks. We re-plumb the hinge post, rebuild the footing, then set the gate so it swings clean. A hinge-only adjustment on a heaved post is a temporary patch, and we don’t sell temporary patches. Call (877) 752-5078 if your gate’s dragging and we’ll tell you what we think before scheduling anything.
We’re certified on nine gate and operator brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That covers the original LiftMaster units still running on 1960s tract homes, the FAAC and BFT operators on newer ranchettes, and the Mighty Mule and Ghost Controls units on smaller residential gates throughout 95670, 95741, and 95742. Whatever brand is on your gate, we know it.
Yes. Every automatic gate in Rancho Cordova needs working safety photocells and a properly set force limit, and any new operator we install gets both. California safety code requires entrapment protection on all automated gates, and a gate that reverses on contact or lacks photocells is a liability as well as a safety hazard. We won’t leave an automated gate running without its photo eyes and a properly tuned reverse mechanism. We handle electric gate repair and installation under the same roof, so one call covers whatever your gate needs.
Winter in Rancho Cordova means tule fog and rain, and that moisture gets into hinges, latches, and chains on both wood and metal gates. Wood swells and binds against the frame. Metal rusts and creaks at the hinge barrels. By late winter, a gate that swung freely in October won’t close without a shove. We lubricate and seal the hinge points, replace rusted pins, and adjust or replace the latch so the gate works year-round without seasonal fighting.
We approach a heavy custom gate differently than a light tract-home gate. The post footings have to be dead plumb and set deeper than a standard pedestrian gate, because a 16-foot powder-coated steel gate leaning two degrees puts enormous strain on the operator and the hinges. We start by measuring the post, correcting any sag, then checking the operator’s rack and pinion alignment before we test the motor’s force settings against the gate’s true weight. If the gate was under-spec’d originally, we’ll tell you, and we’ll show you the difference a correctly matched LiftMaster or FAAC operator makes. Written estimates are always free.
Written by Troy Minden, Owner at Gate Repair Citrus Heights, serving Rancho Cordova and the greater Sacramento area.