Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Folsom, CA
Gate installation in Folsom means working with the reality that this city has two very different housing worlds: the 1990s-2010s stucco-and-tile master-planned communities like Broadstone and Empire Ranch, and the larger semi-rural properties with iron driveway gates on the eastern and southern edges. The summer heat bakes paint off metal gates, while winter storms knock over aging wood posts. We specialize exclusively in gates – it’s all we do – so whether you need a new automatic gate on a Folsom Ranch lot or a full replacement for an HOA-regulated decorative gate, we handle the job without guessing. Call (877) 752-5078 for a free estimate.
Why Folsom Homes Are Different
Folsom’s identity is split between the historic Sutter Street district and the sprawling master-planned ranch-home subdivisions that define most of the city. That split shows up in gate work every week. In Broadstone and Empire Ranch, gates are usually decorative steel or aluminum panels that must match an approved HOA style and color. In the rural edges near the eastern foothills, we see long iron driveway gates on multi-acre horse properties where the gate has to handle heavier use and longer spans. The hard, mineral-heavy well water in those semi-rural areas accelerates rust on hinges and latch hardware faster than homeowners expect. Summer temperatures in Folsom routinely climb past 100 degrees, and that intense sun fades powder coating and dries wood gates to the point of warping. When winter rain arrives, posts that have been slowly loosening in dry soil start to lean. Folsom’s HOA architectural rules are often the real constraint on a gate repair or replacement – the hardware is usually straightforward, but matching an approved color palette and gate profile is what separates a job that passes inspection from one that gets flagged. We know the local HOA realities because we work in these neighborhoods constantly.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Folsom Services
Folsom homeowners and property managers call us most often for two things: a gate that won’t open or close properly, and an electric operator that has stopped responding. Both are covered below, each with its own dedicated Folsom page.
Gate Repair in Folsom
Most gate repairs in Folsom come down to three things: hinge or roller wear, post movement from dry soil and winter water, or latch and lock misalignment from daily use. On older wood ranch gates in the semi-rural areas, we regularly find rusted strap hinges and posts that have shifted out of plumb. On newer steel gates in the subdivisions, the issue is more often a sagging leaf or a latch that no longer lines up after a few hot summers. Whatever brand is on your gate, we know it. One call covers a bent hinge or a failed operator. See Gate Repair in Folsom for the full breakdown on what we fix and what it costs.
Electric Gate Repair in Folsom
Electric gates in Folsom face a specific problem: heat. Solar chargers and circuit boards don’t love 105-degree afternoons, and we replace more capacitors and transformer boards in July and August than any other time of year. Mineral-heavy water also corrodes the low-voltage connections that run from the operator to the safety edges and keypads. When an electric gate stops responding to a remote or keypad, the fix is often a bad connection, not a dead motor. We service LiftMaster, FAAC, BFT, and every other major operator brand – and we carry common boards and remotes on the truck. The complete repair guide is on Electric Gate Repair in Folsom.
Gate Installation in Folsom
A new gate in Folsom has to handle 100-degree summers, winter downpours, and – in many neighborhoods – a set of HOA rules about color, height, and style before you even pick a hinge. We install new gates across all three Folsom ZIP codes: 95671, 95630, and 95763, from modern aluminum driveway gates in Folsom Ranch to steel estate gates on larger rural properties. If repair isn’t the right answer, we’ll tell you – and we’ll build and install the replacement. Gate Repair Citrus Heights offers full Gate Installation in addition to repair, so you don’t need a second contractor.
Automatic Gate Installation
Signs you need it
You want a gate that opens without leaving the car, or your existing manual gate has become a daily hassle and a security gap on a property that needs controlled access.
What it costs in Folsom
Automatic gate installation in Folsom typically runs $800 – $4,000 depending on operator type, gate size, and whether we’re running new power from the house or panel.
How we do it
We survey the driveway, confirm the gate’s weight and post condition, install the operator and safety loops or photo eyes, then program remotes and the keypad on site.
Driveway Gate Installation
Signs you need it
Your existing driveway gate is sagging, rusted through, or doesn’t match the look and function you need now that the property’s use has changed.
What it costs in Folsom
A new driveway gate in Folsom runs $1,400 – $8,500 as a full project including posts, hardware, and finish, with steel and custom iron at the upper end.
How we do it
We remove the old gate and posts if needed, set new posts in concrete sized for the gate’s weight, hang the new gate, and align latches and closers so it swings true.
What Gate Installation Costs in Folsom
| Item | Typical range in Folsom |
|---|---|
| Manual gate installation (basic) | $450 – $1,500 |
| Automatic gate installation | $800 – $4,000 |
| Driveway gate installation (full project) | $1,400 – $8,500 |
How long does gate installation take in Folsom?
Most gate installations in Folsom take one to two days once materials are on site. Custom iron gates with a specific HOA-approved finish add a week or two of fabrication time before installation.
Do you handle the electrical work for an automatic gate?
Yes. We run the low-voltage and line-voltage power from the panel to the operator, install safety loops and photo eyes, and connect the keypad and remotes. We quote the full job before work starts, so there are no surprise power-run charges.
Brands We Service in Folsom
We’re certified to work on nine gate and operator brands, and in Folsom the ones we see most are LiftMaster, FAAC, BFT, and Linear. We stock common boards, remotes, and hinge kits locally so most repairs don’t wait on a parts shipment. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Folsom, CA
| Service | Typical range in Folsom |
|---|---|
| Gate repair | $300 – $700 |
| Motor/operator replacement | $700 – $1,200 |
| Electric gate repair | $300 – $900 |
| Electric gate new panel/board | $400 – $1,000 |
| Gate installation (manual, basic) | $450 – $1,500 |
| Automatic gate installation | $800 – $4,000 |
| Driveway gate installation (full project) | $1,400 – $8,500 |
| Wood gate repair | $170 – $600 |
| Iron gate repair | $200 – $700 |
Prices in Folsom push upward when a job involves HOA finish matching that requires custom powder coating, or when a rural property needs a longer gate span with heavier posts and a bigger operator. Whatever the job, the price is quoted and agreed before any work starts – no open-ended time-and-materials surprises.
Neighborhoods We Serve in Folsom
We work across all of Folsom’s residential and semi-rural areas, from the older established streets near Sutter Street to the newest builds in Folsom Ranch. Our typical response window for gate repairs in Folsom is same day or next morning, depending on when you call.
- Broadstone
- Empire Ranch
- Folsom Ranch
- Lexington Hills
- American River Canyon
Service Area – Cities Near Folsom
While this page focuses on Folsom, our gate repair and installation coverage extends into the surrounding Sacramento Valley communities. We regularly serve Orangevale, CA, El Dorado Hills, CA, Fair Oaks, CA, and Citrus Heights, CA – same gate specialists, same upfront pricing.
Serving Folsom, CA – Our Local Coverage Area
We’re based in the Folsom area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Folsom
Yes. We cover 95671, 95630, and 95763 – the full Folsom area from the historic district through Broadstone, Empire Ranch, and Folsom Ranch, plus the semi-rural edges to the east and south. If you have a gate problem in Folsom, you’re in our service area.
In most Folsom master-planned communities, yes – if the gate is visible from the street and you’re changing its color, style, or material. We can’t file your HOA application for you, but we can provide the specs and finish details your architectural committee will ask for, and in many Folsom neighborhoods we already know which palettes and hardware are pre-approved. Call (877) 752-5078 and we’ll tell you what to expect.
Yes. We work with property managers in Folsom regularly, and we’re used to coordinating around tenant schedules, HOA rules, and access windows. We’ll give you a firm written quote with a start date, and we keep the site clean and the gate operational for as much of the job as possible.
If your Folsom gate is sagging, stuck, or completely dead, call (877) 752-5078 for a free estimate. We specialize exclusively in gates, and we’ll give you an honest assessment and a firm price before any work begins.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically the same day.
- 4You approve before work beginsNothing starts until you say go.
What Folsom Customers Say
"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
- Eduardo Salazar"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
- Cole Padgett"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
- Sofia Castillo